LED high voltage light belt

led light strip manufacturers

Contact

Phone: 400-882-9972

            189-3344-0935

Landline: 0760-88755207

Email: 1104422911@qq.com

Website: www.junshengled.com

Website:en.junshengled.com

Address: Henglan Town, Zhongshan City, Guangdong Province  No. 21, East 3, Kanglong Second Road


LED high voltage lamp strip

your current location : Home >> News >> Technical Information

LED high voltage lamp strip

2019-12-24 14:12:10
Times


   

When installing, you must choose the color length, the light strips should be avoided. Avoid unnecessary waste. The light strip is calculated in meters. That is to say, every 1 meter 2 meters is a unit, the unit cannot be cut. Due to this characteristic of the light strip, when measuring the usage of the light strip, please pay attention to the length of the whole meter the entire 2 meters. One unit is marked with scissors.


     Please make sure to cut the high-voltage led strip accurately on the top marked with scissors. The power of led strip is very small, about 3-5W / m, so it is more energy-efficient than T4 / T5 tube, can adapt to different ceiling shapes. Round light strips have less brightness than flat light strips, but they are cheaper. You should consider them carefully when you buy them.

led高压灯带


   

5630 lamp beads are a package specification for SMD LEDs, with a power of 0.5W a size of 5.6 * 3.0 * 0.9. The product has high brightness, uniform light, small light attenuation, long life, low power consumption, good heat dissipation, high light efficiency, strong antistatic, strong reliability safety. Mainly used in LED lighting products (such as LED bulbs, LED downlights, LED fluorescent lights, LED panel lights, etc.).


     There are only four rows of lights in the led strip with a total of five lines. One of the lines is a positive electrode for conduction, the lamp beads are arranged. Please pay attention to ensure good contact between the pins the wires during installation. Poor contact may cause a single row to dim. If the positive contact is good, the whole bar will be lit.


     High-voltage LED flexible strips are more convenient to install can be driven directly by high-voltage drivers. Generally, the factory can be configured directly. After purchase, the 220V power supply can be directly installed to work normally. The installation of low-voltage LED flexible light bars requires the installation of a DC power supply in front of the light strip to reduce the voltage, which is relatively complicated during installation.


Next:None