During the installation of the light strip, a part may grow after installation. Because the LED light has a fixed cutting opening, the part that has grown out can be cut if it is just in the cutting position. If it is in the cutting position, it can be cut. The remaining light strips are folded placed in the light trough; if the uniformity of the light trough is required, it can be wrapped with dark tape to put in the light trough to ensure the uniformity of the entire light strip.

     A common application in the kitchen is under the cabinet? At least 80% of the owners served by led light strip manufacturers last year chose this approach, which can provide sufficient light for the operating table. A common application in restaurants is to install LED light strips under the shelves of the sideboards to achieve both practical decorative purposes.

The 220V high-voltage flexible patch light strips of led strip manufacturers are mainly based on the original LED strips to improve product performance, making it more in line with the requirements of energy saving environmental protection, more convenient to use. Its big feature is that the flexible patch light strip is increased the original 12V to 220V, the use of a transformer is required in the use, so that the light strip is out of the constraints of the transformer. In the installation use, it can connect 10-50 meters at a time, which is more advantageous than the original 12V flexible patch lamp with a length of 5 meters.

     Indoor installation of led light strip manufacturers: When LED light strips are used for interior decoration, the installation is very simple because there is no wind rain like the outside. on the market. The self-adhesive 3M double-sided tape is affixed to the back of each LED light strip. You can directly remove the sticker on the surface of the 3M double-sided tape during installation, then fix the light bar to the place it needs to be installed. As for some places that need corners grow, what should I do? Very simple, the LED light strip is a circuit structure composed of 3 LEDs in a series-parallel manner. Every 3 LEDs can be cut used separately.