SMD form of led low voltage light strip

Generally, there are four types of conventional patch lamp tape packages: bare board, glue, sleeve, glue. Bare board means directly exposed. The outer layer of the light strip is waterproofed has no waterproof ability. Dipping glue is to apply a layer of colorless transparent epoxy glue silicone directly on the surface of the light strip board. The waterproof effect is average. The sleeve is a lamp strip plate that is inserted into a silicone sleeve sealed with a plug, which has a slightly higher waterproof performance.

     The glue-filling waterproofing is that the led low-voltage lamp belt is put through the silicone sleeve, then the glue is injected into it, the waterproof level is high. Described is the package form of the patch lamp strip, because the old direct plug-in lamp strip has simple workmanship, large volume, the direct plug-in lamp beads are gradually replaced by the patch lamp beads, so it is introduced. With the gradual maturity of LED flexible light strip technology, its application range will be more extensive. The LED flexible light bar uses high-brightness patch LED as the light-emitting element, so it has the advantages of LED light-emitting elements, the light color is pure, soft, no glare. It can be used both for decoration lighting.

The blue light of the led low-voltage light strip can be placed in the bar other places. Purple pink are mostly used in KTV entertainment venues. The effect is dreamy fresh. Rainbow tubes neon lights emit bright colorful dazzling lights, which are mostly used for outdoor decoration such as landscape lighting, bridges large buildings. Red green light strips need to be used in conjunction with the background are generally recommended. The colored light needs to be used in conjunction with the controller, can be used for decoration in audio-visual rooms.

     LED lights are divided into RGB LED magic lights RGB LED full-color lights. LED magic light strips (also known as marquee strips) RGB full-color light strips require the use of a controller to achieve the changing effect, the control distance of each controller is different. Generally speaking, the control distance of a simple controller is 10 To 15 meters, the control distance of the remote controller is 15 to 20 meters, the length can be controlled to 30 meters. If the LED light strip is connected for a long distance the controller cannot control such a long light strip, then a power amplifier is needed for tapping.